Mobile Zombie
I try to use my 2 PCI soundscards in another PC-configuration, M-audio Audiophile 2496.
I used them with VDJ 7.4 for years, but I cannot assign those cards to output stereo signal for two decks separately, in VDJ8.
I select M-audio (ASIO) for both decks 1 and 2, and also click "Two soundscards" but as soon as I begin to select "Channel" it reverts back to "Internal soundcard"
In VDJ7.4 I had the same config, but then I was able to select output channel 1/2 for deck1 and channel 3/4 for deck2.
Any advice?
I used them with VDJ 7.4 for years, but I cannot assign those cards to output stereo signal for two decks separately, in VDJ8.
I select M-audio (ASIO) for both decks 1 and 2, and also click "Two soundscards" but as soon as I begin to select "Channel" it reverts back to "Internal soundcard"
In VDJ7.4 I had the same config, but then I was able to select output channel 1/2 for deck1 and channel 3/4 for deck2.
Any advice?
geposted Thu 02 Jul 15 @ 4:47 pm
blckjck
Did you try just one soundcard? I have not tried multiple cards by the same manufacture all running on the same ASIO driver yet.
But, you say it showed up as channels 1/2 & 3/4 before, sounds like "one" sound card is what the driver is presenting to the software.
But, you say it showed up as channels 1/2 & 3/4 before, sounds like "one" sound card is what the driver is presenting to the software.
geposted Thu 02 Jul 15 @ 7:30 pm
Mobile Zombie
It works fine with one of the cards as output device.
In the M-audio control application both cards are shown, it's possible to have up to four cards on the same machine.
But, it's just like VDJ8 cannot understand that there are two soundcards available, perhaps this should be put under bugs instead, don't know.
In the M-audio control application both cards are shown, it's possible to have up to four cards on the same machine.
But, it's just like VDJ8 cannot understand that there are two soundcards available, perhaps this should be put under bugs instead, don't know.
geposted Fri 03 Jul 15 @ 1:20 am
Mobile Zombie
geposted Fri 03 Jul 15 @ 2:01 am
Adion
I guess selecting the third line for the channels should be the second card?
geposted Fri 03 Jul 15 @ 3:18 am
Mobile Zombie
Thanks Adion, but how would the third line differ from the first line?
And why isn't it possible to select "Two soundcards" ?
And why isn't it possible to select "Two soundcards" ?
geposted Fri 03 Jul 15 @ 5:54 am
Adion
You would need to make the column wider to see the full text I guess.
If you select 2 sound cards, that could also work, but then you are no longer using ASIO (since that is only 1 driver that groups the 2 sound cards), but WASAPI.
In that case you can probably select each of the sound cards in the sound card drop down.
If you select 2 sound cards, that could also work, but then you are no longer using ASIO (since that is only 1 driver that groups the 2 sound cards), but WASAPI.
In that case you can probably select each of the sound cards in the sound card drop down.
geposted Fri 03 Jul 15 @ 6:11 am
Mobile Zombie
Adion, I did not know that 2 soundcard option did not include ASIO.
And you're right, the third line is actually the second card so everything works now.
Thanks!
And you're right, the third line is actually the second card so everything works now.
Thanks!
geposted Sat 04 Jul 15 @ 10:06 am
VDJ Ron
It might be worth checking out the drivers that you have installed.
M Audio driver support seems a little patchy.
http://www.m-audio.com/support/drivers-search
Legacy-->Delta Audiophile 2496--> and whatever operating system.
M Audio driver support seems a little patchy.
http://www.m-audio.com/support/drivers-search
Legacy-->Delta Audiophile 2496--> and whatever operating system.
geposted Sat 04 Jul 15 @ 10:43 am