warrenwilson1
With DJ Controllers not having the band cut feature for sometime it seems, what effect can i apply to simply kill my low band dead instead of using a LP type filter?
geposted Sun 21 Jun 20 @ 9:11 am
groovindj
If you want to kill the lows, you need to use a HP filter, not LP.
LP is Low Pass (the lows get through). HP is High Pass (kills the lows).
LP is Low Pass (the lows get through). HP is High Pass (kills the lows).
geposted Sun 21 Jun 20 @ 9:24 am
warrenwilson1
thanks for your reply, i loose so much amplification on that channel with a HP filter is there not a way just to simply kill the eq bands and have some boost? I really struggle at 180-200 bpm without it.
geposted Sun 21 Jun 20 @ 9:33 am
groovindj
If you remove frequencies then of course the output will get quieter. Not as many frequencies in the signal.
You could try using a compressor/limiter on the master FX slot to compensate - or just turn the channel up while you're using the filter.
You could try using a compressor/limiter on the master FX slot to compensate - or just turn the channel up while you're using the filter.
geposted Sun 21 Jun 20 @ 11:00 am