hardware|denon VIRTUAL DJ SOFTWARE - Hardware Manuals - Denon DJ - SC-2900 - Setup

Hardware Manuals


Denon DJ - SC-2900

SETUP


Step 1. Connections


Connect each SC-2900 to a USB port of your computer using the provided USB cable. If an external analogue dj mixer is used, connect each unit with an Input Channel of the mixer using proper RCA cables.
Connect the unit to a AC Power Outlet using the provided cable and power on the units from the rear switcher, once the connections are made.

Press the MIDI button at the top of the unit to set the SC2900 to MIDI mode and allow controlling a VirtualDJ deck

Note : The Link connection cannot be used in MIDI mode. Each SC2900 unit needs to be connected via a USB port to the computer

Step 2. Drivers


Windows : Download and install the Denon ASIO drivers from http://www.denondj.com/products/view/sc2900
Mac OSX : No drivers is required to be installed for Mac OSX computers.

Update the firmware of each unit to the latest version from http://www.denondj.com/products/view/sc2900

Step 3. VirtualDJ


Install VirtualDJ 8 from http://www.virtualdj.com/download/index.html (in case you have not done already)

Start VirtualDJ and login with your Account credentials. A Pro Infinity, Pro Subscription or Plus SC-2900 Controller License is required.

Find a detailed installation procedure at http://www.virtualdj.com/manuals/virtualdj8/quickstart.html

Detection Window
A detection window will appear when the unit is first connected with VirtualDJ, verifying proper connection

Click on the Use Soundcard button in order VirtualDJ to apply the pre-defined audio configuration using the built-in sound-card of the unit. Speakers need to be connected to the rear panel of the unit in this case.

Click to OK


The unit is now ready to operate with VirtualDJ.

Controls