Hardware Manuals


Pioneer DJ - DDJ-SR2  

Other Settings


The DDJ-SR2 offers firmware Settings via UTILITIES mode, such as Jog illumination and Fader Start modes. Read DDJ-SR2 Manual for further details.

JOG ILLUMINATION


The LED ring of the DDJ-SR2 can operate in 3 different modes, offering useful information while mixing.

How to select the Jog Illumination Mode:
  • While the DDJ-SR2 is powered off, hold both left SYNC and left PLAY buttons and then power on the unit.
  • Release SYNC and PLAY buttons
  • Use the FX1 ON, FX2 ON or FX3 ON buttons on the right FX unit to select one of the 3 available modes for the Jog Illumination
    [list]
  • When FX1 ON is turned on (default mode):
    - The Jog Ring will be lit in red when DECK 1 or DECK 2 is selected from the Mixer SOURCE select switches.
    - The Jog Ring will be lit in amber when DECK 3 or DECK 4 is selected from the Mixer SOURCE select switches
    - The Jog Ring will be off when PHONO/LINE is selected from the Mixer SOURCE select switches.
  • When FX2 ON is turned on:
    - The Jog Ring will be lit in blue when the VINYL mode is enabled on the selected Deck.
    - The Jog Ring will be off when the VINYL mode is disabled on the selected Deck.
  • When FX3 ON is turned on:
    - The Jog Ring will be lit with the assigned color of the loaded track.
    - The Jog Ring will be off if no color is assigned (default) to the loaded track.
    - In this mode, the color of the Jog ring can be customized via VDJ script actions assigned to the LED_JOG key

  • Power off the DDJ-SR2 to save your selection.[/list]


    FADER START/STOP/SYNC


    The DDJ-SR2 offers the ability to enable/disable the Fader Start/Stop/Sync functionality when SHIFT is pressed and the VOLUME faders are moved from minimum to other position or vice versa.

    How to select the SHIFT+Volume Fader Mode:
    • While the DDJ-SR2 is powered off, hold both left SYNC and left PLAY buttons and then power on the unit.
    • Release SYNC and PLAY buttons
    • Use the FX1 ON, FX2 ON or FX3 ON buttons on the left FX unit to select one of the 3 available modes for the SHIFT+Volume Faders
      [list]
    • When FX1 ON is turned on (default):
      - Fader Start/Stop functionality is enabled, along with the Sync mode. When SHIFT+Volume fader is moved from the minimum position to any other, the Deck will start playing and will be also synced to the opposite/master deck. When SHIFT+Volume is moved to the minimum position, the Deck will stop at the Cue position.
    • When FX1 ON is turned on:
      - Fader Start/Stop functionality is enabled, but without the Sync mode. When SHIFT+Volume fader is moved from the minimum position to any other, the Deck will start playing but will not be synced to the opposite/master deck. When SHIFT+Volume is moved to the minimum position, the Deck will stop at the Cue position.
    • When FX3 ON is turned on:
      - Fader Start/Stop functionality is disabled. When SHIFT+Volume fader is moved, no additional functionality will apply.

    [*] Power off the DDJ-SR2 to save your selection.[/list]



    For further Technical features and specifications, visit

    Pioneer DDJ-SR2
    Product's Page






    Hardware Integration Department
    2017 - ATOMIX PRODUCTIONS



    Reproduction of this manual in full or in part without written permission from Atomix Productions is prohibited.