Setup

Firmware & Drivers

Firmware: At the moment this manual was written, no firmware update was available, but make sure your unit is updated to the latest available from https://www.pioneerdj.com/en/product/controller/ddj-sr2/black/support/#info

Drivers (for both Windows and Mac OSX): Install the latest drivers from https://www.pioneerdj.com/en/support/software/ddj-sr2/#drivers

VirtualDJ Setup

Download and install VirtualDJ 8 from http://www.virtualdj.com/download/index.html (in case you have not done already)


Once VirtualDJ 8 is launched, a Login Window will appear to enter your virtualdj.com account credentials.

A Pro Infinity or a Pro Subscription License is required to fully use the Pioneer DDJ-SR2 Without any of the above Licenses, the controller will operate for 10 minutes each time you restart VirtualDJ.

http://www.virtualdj.com/buy/index.html

A detection window will appear right after, asking to use or not the pre-defined audio setup with the built-in sound card of the DDJ-SR2 You can still change that from Settings->AUDIO tab.

Click on the "Use Soundcard" button if your speakers are connected to the Master Output of the DDJ-SR2

Click to OK

The unit is now ready to operate.

MIDI Operation

The unit should be visible in the CONTROLLERS tab of Config and the “factory default” available/selected from the Mappings drop-down list. The factory default Mapping offers the functions described in this Manual, however those can be adjusted to your needs via VDJ Script actions.



Find more details at http://www.virtualdj.com/wiki/VDJ8script.html

AUDIO Setup

The unit has a pre-defined Audio setup and a special button in the AUDIO tab of Config to provide that. Alternative Audio setups can be applied in the same window.



Alternative audio configurations can be applied depending on the routing of the CH1/CH2 Inputs. See Inputs & Recording

For further software settings please refer to the User Guides of VirtualDJ 8.
http://www.virtualdj.com/manuals/virtualdj8/index.html

Refer to the manual of the unit for further features-settings. https://www.pioneerdj.com/en/support/documents/ddj-sr2/#manual