FX1. When enabled (LED lit), the FX LEVEL touch-strip will apply on the selected Effect of FX Slot 1. Hold SHIFT and then use this button to select the next available Effect for the FX Slot 1
FX2. When enabled (LED lit), the FX LEVEL touch-strip will apply on the selected Effect of FX Slot 2. Hold SHIFT and then use this button to select the next available Effect for the FX Slot 2
FX3. When enabled (LED lit), the FX LEVEL touch-strip will apply on the selected Effect of FX Slot 3. Hold SHIFT and then use this button to select the next available Effect for the FX Slot 3
FX LEVEL. Touch and slide this touch-strip to adjust the 1st Parameter of the selected FX Slot. and activate the Effect, as long as the touch-strip is held.
HOLD. When enabled, the Effect will remain active after the touch-strip is released. Press again to turn the effect off.
Notes : - Due to hardware/firmware limitation, only 1 FX Slot can be selected each time. - When no FX Slot is selected, the LEDs of the FX1, FX2, FX3 will flash if HOLD is enabled or the touch-strip is used, indicating that a FX Slot needs to be selected.
