FRONT & REAR PANELS

Pioneer DJM-S5 - Rear panel

CONNECTION

Operation

28 * USB POWER

Use this USB-C connection to power the device using a proper USB power device,

29 * PC USB POWER

Use this USB-C connection to connect to a USB port of a computer.

30POWER

Power on when all other connections are done

31 Master OUT

Balanced Master Output using XLR cables to connect with your amplifier/amplified speakers

32 BOOTH OUT

Booth Output using RCA cables to connect with your monitor speakers

33 CH1/CH2 INPUTS

Use these sockets to connect an external audio source. Depending on the type of the source, set the PHONO/LINE switch to the appropriate position. The sources connected to these Inputs can be selected from the Left (for CH1)/Right (for CH2) Source Selector at the top panel

34 AUX INPUT

Connect any Digital Media source to this additional input. Signal from this Input will directly routed to the Master Output. The level of this audio signal is controlled from the AUX LEVEL knob at the front panel of the unit

35 MIC INPUT

Connect a Microphone using a XLR or 1/4" TRS cable. The level of this audio signal is controlled from the MIC LEVEL knob at the front panel of the unit

* Use one or the other USB power connections.




Pioneer DJM-S5 - Front panel

CONTROL

Operation

36 MIC LEVEL

Adjust the Level of the Microphone Input (connection at the rear panel).

37 AUX LEVEL

Adjust the Level of the Auxiliary Input (connection at the rear panel)

38 CROSSFADER FEELING ADJUST

Adjust the feeling of the Crossfader (how much strength is required to slide)

39 HEADPHONES SOCKET

Connect your Headphones using a 1/8" or a 1/4" adapter. The level of this output is controlled from the top panel