Anmelden:     

Forum: Old versions

Topic: Once again: Recording issues with VDJ7

Dieses Thema ist veraltet und kann veraltete oder falsche Informationen enthalten.

Hi there,
VDJ5 worked so well for me! More than 2 years I used it with succes. I have an External Mixer with 2 USB, Mic and Headphone plugs and my Soundconfig was the following:

Input - None
Output - External Mixer - Left Deck: Left Card, Right Deck: Right Card
Soundcards - 2 Cards - USB Audio Codec (1), USB Audio Codec (2)

When I wanted 2 record my set, I would connect the Record Out of my Mixer with the Sound System (because it is very loud) and the Master Out with the Line-In at my PC. It was no problem to tell VDJ5 to just record the Line-In...
But now I upgraded to VDJ7 and it suddenly is!

When I keep my settings like in VDJ5, I cannot record the Line-In anymore, instead VDJ7 is recording the 2 USB-Channels. That's not ok, because then I wont be able to prelisten to any tracks with my headphones anymore, because as soon as I prelisten this will be recorded as part of the mix, but I just wanna record the Master!!!

So I gathered some intel and found that you have to go to Advanced Config, to make the recording work. And I fixed it,....but what the heck....now my Mixer wont work anymore!!! I tried almost every combination, but it just wont work, the way it did before. Example:

Line-In1 - Realtek HD Audio Input - Input1&2
Deck1 - USB Audio Codec (1) - Output1&2
Deck2 - USB Audio Codec (2) - Output3&4

I can record with these settings, but every track I play with VDJ will be sent to the left Deck on my Mixer. I can't mix, if I can use only one Deck!
HELP PLZ
 
geposted Tue 03 May 11 @ 8:02 am
When you say "upgraded" is it a registered copy of VDJ7 from this site or a cracked copy from the internet?

Keith
 
 
At last someone who can give answers about the recording... i have 2 cdj 400 and pioneer 600 and i want to record Through the line in with vdj rcording, How to configure the advanced settings ? Thanks
 
Route a proper cable from your mixer's booth or rec output to the line-in of your internal sound card (pc or laptop). make sure that it is not muted from Control panel.

Advanced Sound setup
Deck 1 .... CDJ400ASIO ..output ch 1&2
Deck 2... ..CDJ400ASIO ..output ch 3&4
RecordLoopback.. Your internal sound card name ... Inputs 1,2
 
It does not work I tried number of ways...
 
What do you mean it doesn't work?? No sound at all, the sound is really bad? What format are you recording to?

Huey
 


(Alte Themen und Foren werden automatisch geschlossen)