dreyes
So I got my whole set up last week.
That is when I downloaded drivers for everything, so all drivers should be up to date:
My Set up:
Sager NP9262 (Clevo d900c)
Operating System: Windows 7 Home Premium 64-bit (6.1, Build 7601) Service Pack 1
BIOS: BIOS Revision: D900C 1.00.13S LS2
Processor: Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz (4 CPUs), ~2.4GHz
Memory: 4096MB RAM
2 Stanton T.62 Turntables
Hercules Dj Control Rmx Controller
So here is the problem: Everything Configures fine. However after a few minutes (ranges anywhere from 5 to 10 minutes) A growl like distortion gets introduced into all of the audio.
Here is the kicker: The distortion does NOT show up when VDJ makes an internal recording of the mix.
So the Distortion is coming out of the Main outs but is not in VDJ.
I took a recording of this happening, created a dxdiag, took screenshots of my configurations, then realized I can't put any of that stuff in here, so please, if you need to know any more info just ask.
yes the turntables are grounded, and my power is isolated. But even if they weren't the distortion would always be present. What really boggles me is it only comes in after a few minutes.
Oh, also, If I close VDJ, and wait a couple minutes, then reopen it, the Distortion is Gone. Any thoughts?
That is when I downloaded drivers for everything, so all drivers should be up to date:
My Set up:
Sager NP9262 (Clevo d900c)
Operating System: Windows 7 Home Premium 64-bit (6.1, Build 7601) Service Pack 1
BIOS: BIOS Revision: D900C 1.00.13S LS2
Processor: Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz (4 CPUs), ~2.4GHz
Memory: 4096MB RAM
2 Stanton T.62 Turntables
Hercules Dj Control Rmx Controller
So here is the problem: Everything Configures fine. However after a few minutes (ranges anywhere from 5 to 10 minutes) A growl like distortion gets introduced into all of the audio.
Here is the kicker: The distortion does NOT show up when VDJ makes an internal recording of the mix.
So the Distortion is coming out of the Main outs but is not in VDJ.
I took a recording of this happening, created a dxdiag, took screenshots of my configurations, then realized I can't put any of that stuff in here, so please, if you need to know any more info just ask.
yes the turntables are grounded, and my power is isolated. But even if they weren't the distortion would always be present. What really boggles me is it only comes in after a few minutes.
Oh, also, If I close VDJ, and wait a couple minutes, then reopen it, the Distortion is Gone. Any thoughts?
geposted Wed 02 Nov 11 @ 8:58 pm
dreyes
So I'm going to try and post some examples of the how the distortion kicking in and also post ss of my setup.
(Really though I don't know how the VDJ configuration would matter if the distortion does not show up in Recordings made by VDJ)
(The distortion also showed up in Mixxx)
Here is where the Distortion comes in
Distortion_Comes_In.mp3 - 0.31MB
This is a clearer example of how the distortion sounds
DistortionExample.mp3 - 0.27MB
Performaces Tab
Sound Setup
RMX Console
Options
And before someone herp derps about the scratching, I'm a beginner and practicing.
(Really though I don't know how the VDJ configuration would matter if the distortion does not show up in Recordings made by VDJ)
(The distortion also showed up in Mixxx)
Here is where the Distortion comes in
Distortion_Comes_In.mp3 - 0.31MB
This is a clearer example of how the distortion sounds
DistortionExample.mp3 - 0.27MB
Performaces Tab
Sound Setup
RMX Console
Options
And before someone herp derps about the scratching, I'm a beginner and practicing.
geposted Thu 03 Nov 11 @ 5:44 pm
dreyes
Okay well I guess trying to post up ss and recordings was a failure. Not sure how to make that work.
geposted Thu 03 Nov 11 @ 5:45 pm