- Loop : Turn this knob to adjust the size used by automatic Loops , or to change the length of the current Loop . Hold down SHIFT (13) and turn this knob clockwise (while performing a Loop ) to move the Loop forward in the track. The Loop will move as many beats as the current Loop . Hold down SHIFT and turn the knob counter clockwise to move the Loop backwards in time. The track playing position will jump in order to remain inside the Loop at the same position. Press the knob down to activate/deactivate an automatic Loop .
- LCD DISPLAY: Shows the size that will be used by automatic Loops , or the length of the current Loop . When a Loop is active the LCD will blink to notify you. When the corresponding channel is in hardware mode, the screen will show the selected analog input (Ph/Ln)