FRONT & REAR PANELS

KEY

Operation

33 AC POWER

Connect the unit with an AC Outlet using the provided cable to this socket. Power on when all other connections are done

34 Master OUT 2

Alternative Un-balanced Master Output using RCA cables

35 Master OUT

Balanced Master Output using XLR cables to connect with your amplifier/amplified speakers

36 BOOTH OUT

Booth Output using 1/4" TRS cables to connect with your monitor speakers

37 USB A/B

Use any of the 2 available USB ports to connect the DJM-S11 to a computer. See further details at the Back-to-Back section

38 CH1/CH2 INPUTS

Use the LINE/PHONO RCA inputs to connect a CD (or other Digital Media Player) or a Turntable. The sources connected to these Inputs can be selected from the Left (for CH1)/Right (for CH2) Source Selector at the top panel

39 CDJ/CONTROLLER

Connect compatible multi players or controllers.
Not recommended for storage devices connections. .If you turn input selector switches, devices are forcibly disconnected from any PC/Mac, so data on these devices may break.

40 MIC INPUT

Connect a Microphone using a XLR or 1/4" TRS cable

41 AUX INPUT

Connect any Digital Media source to this additional input. Signal from this Input will directly routed to the Master Output. The level of this audio signal is controlled from the AUX LEVEL knob at the front panel of the unit

KEY

Operation

42 MIC SECTION

Adjust the Level, High and Mid frequencies or apply an Echo FX to the Microphone Input (connection at the rear panel). Use the MIC On/Off switcher to turn the Microphone on/off. If the TALK OVER switcher is set to ON, the level of audio signal from the Master Output will be automatically reduced when Microphone is used

43 AUX LEVEL

Adjust the Level of the Auxiliary Input (input at the rear panel)

44 FEELING ADJ

Adjust the feeling of the Crossfader (how much strength is required to slide)

45 CROSSFADER REVERSE

Reverse the blending behavior of the Crossfader.

46 CROSSFADER CURVE

Adjust the slope (blending curve) of the Crossfader.(from Smooth to Cut/Scratch)

47 CH FADER CURVE

Adjust the slope (curve) of the Channel Faders.(from Smooth to Cut/Scratch)

48 CH FADER REVERSE

Reverse the fading behavior of the Channel faders.

49 HEADPHONES SOCKET

Connect your Headphones using a 1/8" or a 1/4" adapter. The level of this output is controlled from the top panel