Controls

KEY

ACTION

SHIFT (SECONDARY) ACTION

S SHIFT

Hold this button down to access secondary actions as described in the SHIFT ACTION column.

M2 *CONTROL BANK

Select one of the 3 available modes for the 8 CTRL knobs, the 8 Faders and the 8 buttons.
Sampler, Effects and Pads mode

* The CONTROL BANK buttons are hardware controls, they do not send any MIDI message, so cannot be assigned to a VirtualDJ action.

CONTROL FADERS (ALL MODES)

KEY

ACTION

F1 FADER 1

Adjust the volume of Samples on 1st column (1,5,9 and 13)

F2 FADER 2

Adjust the volume of Samples on 2nd column (2,6,10 and 14)

F3 FADER 3

Adjust the volume of Samples on 3rd column (3,7,11 and 15)

F4 FADER 4

Adjust the volume of Samples on 4th column (4,8,12 and 16)

F5 FADER 5

Adjust the volume of Sampler Group 1. Read more here about Sampler Groups

F6 FADER 6

Adjust the volume of Sampler Group 2.

F7 FADER 7

Adjust the volume of Sampler Group 3.

F8 FADER 8

Adjust the volume of Sampler Group 4.

CONTROL BUTTONS (ALL MODES)

KEY

ACTION

B2 BUTTON 2

Select Left Deck

B3 BUTTON 3

Select Right Deck

B4 BUTTON 4

Set current position of the selected Deck as Loop Entry ( Loop In) point, to create a manual Loop

B5 BUTTON 5

Set current position of the selected Deck as Loop Exit ( Loop Out) point, to complete a manual Loop . Use this button again to exit a Loop

B6 BUTTON 6

Triggers a Loop of the selected size in beats on the selected deck

B7 BUTTON 7

Halves the size of the Loop

B8 BUTTON 8

Doubles the size of the Loop

CONTROL ENCODERS

KEY

ACTION

SAMPLER MODE (BANK A)

E1 ENCODER 1

Adjust the Master Volume of the Sampler Output.

E2 ENCODER 2

Selects a Sampler Bank.

E3 ENCODER 3

Selects a Trigger mode for the Sampler (On/off, Hold, Stutter and Unmute).

E4 - E8
ENCODERS 4-8

Not used.

EFFECTS MODE (BANK B)

KEY

ACTION

SHIFT (SECONDARY) ACTION

E1 ENCODER 1

Single FX mode : Adjust the 1st Parameter of the selected Effect on Left deck
Multi FX mode : Adjust the 1st Parameter of the selected Effect in FX Slot 1 on the Left deck.

Single FX mode : Adjust the 4th Parameter (if available) of the selected Effect on the Left deck
Multi FX mode : Adjust the 2nd Parameter of the selected Effect in FX Slot 1 on the Left deck

E2 ENCODER 2

Single FX mode : Adjust the 2nd Parameter of the selected Effect on Left deck
Multi FX mode : Adjust the 1st Parameter of the selected Effect in FX Slot 2 on the Left deck.

Single FX mode : Adjust the 5th Parameter (if available) of the selected Effect on the Left deck
Multi FX mode : Adjust the 2nd Parameter of the selected Effect in FX Slot 2 on the Left deck

E3 ENCODER 3

Single FX mode : Adjust the 3rd Parameter of the selected Effect on Left deck
Multi FX mode : Adjust the 1st Parameter of the selected Effect in FX Slot 3 on the Left deck.

Single FX mode : Adjust the 6th Parameter (if available) of the selected Effect on the Left deck
Multi FX mode : Adjust the 2nd Parameter of the selected Effect in FX Slot 3 on the Left deck

E4 ENCODER 4

Not used.

E5 ENCODER 5

Single FX mode : Adjust the 1st Parameter of the selected Effect on Right deck
Multi FX mode : Adjust the 1st Parameter of the selected Effect in FX Slot 1 on the Right deck.

Single FX mode : Adjust the 4th Parameter (if available) of the selected Effect on the Right deck
Multi FX mode : Adjust the 2nd Parameter of the selected Effect in FX Slot 1 on the Right deck

E6 ENCODER 6

Single FX mode : Adjust the 2nd Parameter of the selected Effect on Right deck
Multi FX mode : Adjust the 1st Parameter of the selected Effect in FX Slot 2 on the Right deck.

Single FX mode : Adjust the 5th Parameter (if available) of the selected Effect on the Right deck
Multi FX mode : Adjust the 2nd Parameter of the selected Effect in FX Slot 2 on the Right deck

E7 ENCODER 7

Single FX mode : Adjust the 3rd Parameter of the selected Effect on Right deck
Multi FX mode : Adjust the 1st Parameter of the selected Effect in FX Slot 3 on the Right deck.

Single FX mode : Adjust the 6th Parameter (if available) of the selected Effect on the Right deck
Multi FX mode : Adjust the 2nd Parameter of the selected Effect in FX Slot 3 on the Right deck

E8 ENCODER 8

Not used.

PADS MODE (BANK C)

E1 ENCODER 1

Selects a Pad page on the Left deck. Read more here about Pads

E2 ENCODER 2

Adjust the Parameter 1 of the selected Pad page on Left deck.

E3 ENCODER 3

Adjust the Parameter 2 of the selected Pad page on Left deck

E4 ENCODER 4

Not used.

E5 ENCODER 1

Selects a Pad page on the Right deck.

E6 ENCODER 6

Adjust the Parameter 1 of the selected Pad page on Right deck.

E7 ENCODER 7

Adjust the Parameter 2 of the selected Pad page on Right deck

E8 ENCODER 8

Not used.