1 CROSSFADERBlends audio signal from the decks assigned as left and right sides of the crossfader.2 VOLUMEAdjust the VolumeStarts playback when the fader is moved from the minimum (low) position to a different one and stops to Cue position when moved from any position to the minimum (Fader Start/Stop)3 VU METERSThe LED array indicates the pre-fader Level Output4 Cue Send the pre-fader audio signal of the Deck to the Headphones channel (for pre-listening)5 FILTERApply the selected Color FX (Filter by default). When at center position, the Color FX is not applied. The Color FX can be selected from the VirtualDJ GUI.6 BASSAdjust the Low (Bass) Equalizer Band7 MIDAdjust the Mid (Middle) Equalizer Band8 TREBLEAdjust the High (Treble) Equalizer Band9 LEVELAdjust the pre-fader Level (Gain)10 LOADLoads the selected track from the Browser to the Left/Right Deck. Double/fast press to clone the track of Left/Right Deck to the other Deck.Unloads the track from the same Left/Right Deck 11 BROWSEScrolls through Folders or Tracks Push to toggle focus between Folders and Songs ListSet focus to Folders list. If focus is in Folders list, expand collapse sub-folders 12 Cue GAINAdjust the Level of the Headphones Output Channel13 Cue MIXSend audio signal from the Master Output to the Headphones channel when in MIX (right) position. Send audio signal from the Decks that have their PFL enabled to the Headphones channel when in Cue (left) position. Blends the above audio signals when in all other positions.14 MIC1/LINE AUX SWITCH* Select whether you want to control the MIC1 input, or the AUX input.15 MIC1/LINE LEVEL* Adjust the Volume of the Mic 1 or the AUX Input (connections at the rear panel)16 MIC1/LINE TONEApply a simple single band EQ on the MIC1/LINE Input17 BOOTHAdjust the Volume of the Booth Output18 Master Adjust the Volume of the Master Output
* Note: The Microphone inputs along with the AUX input of the NS4FX are directly routed to the Master Output of the device (hardware operation) and they are not part of the USB Audio interface. Therefore they cannot be recorded, used for broadcasting or controlled in any way from VirtualDJ. The MIC level knobs are not sending any MIDI messages and cannot be mapped to any VirtualDJ actions.
