Hardware Manuals

Pioneer DJ - DDJ-FLX10  


Firmware & Drivers

Firmware: Update the firmware of the device to the latest available version from

Drivers For both Windows and Mac OS, install the necessary drivers from https://www.pioneerdj.com/en/support/software/controller/ddj-flx10/

VirtualDJ Setup

Download and install VirtualDJ from https://www.virtualdj.com/download/index.html (in case you have not done already)

Once VirtualDJ is opened, a Connect Window will appear. Login with your virtualdj.com account.

A Pro Infinity or a Pro Subscribtion is required to fully use the Pioneer DDJ-FLX10. Without any of the above Licenses, the controller will operate for 10 minutes each time you restart VirtualDJ.

A detection window will appear next asking to use or not the pre-defined audio setup with the built-in sound card of the DDJ-FLX10.

Click on the "DDJ-FLX10" button if speakers are connected to the Master Output of the DDJ-FLX10. You can still change that from Settings->AUDIO tab.

Click to OK.

The device is now ready to operate with VirtualDJ.

MIDI Operation

The device should be visible in the MAPPING tab of Config and the “factory default” available/selected from the Mappings drop-down list. The factory default Mapping offers the functions described in this Manual, however those can be adjusted to your needs via VDJ Script actions.

Find more details at https://www.virtualdj.com/wiki/VDJ8script.html


The device has a pre-defined Audio setup and a special button in the AUDIO tab of Config to provide that.

Please read the manual of DDJ-FLX10 for further functionality https://www.pioneerdj.com/en/support/documents/controller/ddj-flx10/

For further software settings please refer to the User Guides of VirtualDJ. https://www.virtualdj.com/manuals/virtualdj/index.html